Flexible optical touch sensor simultaneously pinpoints pressure strength and location

(Press-News.org) WASHINGTON — Researchers have developed a flexible optical touch sensor that can simultaneously detect the strength and location of pressure with high sensitivity and stability. The advance in tactile sensing paves the way for next-generation robotic touch interfaces, advanced medical diagnostics and highly responsive wearable electronics.

“Unlike conventional optical tactile sensors, which tend to have a single input-output path, our sensor design achieves multiple optical channels by embedding polymer optical waveguides in silicone rubber,” said research team leader Takaaki Ishigure from Keio University in Japan. “This makes it possible to detect pressure in more than one spot with a design that is scalable and adaptable to various applications.”

In the Optica Publishing Group journal Optics Express, the researchers detail the fabrication of a four-channel optical tactile sensor measuring 5 X 1.5 centimeters and just 500 microns thick. They show that it can accurately detect pressure positions with a spatial resolution of about 1.5 mm.

“Looking ahead, this technology could redefine the way machines and humans interact,” said the paper’s first author Yuantian Yin, also from Keio University. “For example, it could give robotic systems high-precision touch, ensuring safer and more intuitive human-robot collaboration. In healthcare, tactile sensors could be integrated into bionic prosthetic limbs to provide tactile feedback that enables more natural grasping and manipulation.”

Creating multiple optical paths

Although other research groups have demonstrated thin, flexible tactile sensors by embedding commercial glass optical fibers into polymer sheets, these designs typically have a single optical path. This means that complex, rigid wiring arrangements must be used to achieve the multi-channel configurations necessary for pressure sensing from more than one location.

To create an optical tactile sensor with multiple optical channels, the researchers used a method they previously developed for fabricating polymer optical waveguides. Known as the Mosquito method, it uses a syringe to inject a liquid resin monomer into another that has been spread in a thin sheet on a substrate. The liquids are then UV-cured to solidify the materials. This approach makes it possible to create 3D core wiring and circular cores like the ones found in traditional optical fibers, which are difficult to produce using conventional major fabrication methods.

“With the Mosquito method, we formed polymer cores within a sheet of flexible silicone rubber known as PDMS in one step, greatly increasing the flexibility of the waveguide structural design,” said Ishigure. “This method allows us to control how the light is guided, and thus the sensor’s sensitivity, by adjusting properties such as confinement and core size. This would not be possible with commercial optical fibers that have fixed properties.”

Waveguide-based touch sensing

Using the Mosquito fabrication method, the researchers created multiple thin light paths inside a thin sheet of PDMS to create an optical touch sensor. When no pressure is applied, the light transmits through all the paths until it reaches the output side of the sheet. However, when a point on the sheet’s surface is pressed, the area around that point becomes compressed, causing the light path underneath the point to bend.

If the bend is sharp enough, some light leaks from the path, which decreases the light intensity. By monitoring which light paths get dimmer and by how much, it is possible to determine where the pressure was applied and how strong it was, making distributed tactile sensing possible.

To test the sensor, the researchers applied controlled pressure with a fingertip or a force gauge while monitoring the optical output. The sensor successfully detected fingertip pressure that was roughly the same as when tapping an icon on a smartphone screen and demonstrated pressure sensitivities of 8.7 to 10.9 dB/MPa. It also detected changes in light intensity within 33 ms, recovered well after repeated cycles and pinpointed pressure positions with a spatial resolution of about 1.5 mm. According to the researchers, these results confirmed the sensor’s high sensitivity, reliability and repeatability.

Future work will focus on improving the spatial resolution of the sensor and further extending it to 3D cross-waveguide structures to achieve large-area, multi-point, high-density distributed tactile perception. The team also plans to refine the fabrication process to lower costs and improve integration, while exploring real-world applications in human–machine interaction.

Paper: Y. Yin, T. Ishigure, “PDMS-Based Tactile Sensing: Distributed Sensor with a Multiple-Core Polymer Waveguide,” Opt. Express, 33, (2025).

DOI: 10.1364/OE.572242.

About Optica Publishing Group

Optica Publishing Group is a division of the society, Optica, Advancing Optics and Photonics Worldwide. It publishes the largest collection of peer-reviewed and most-cited content in optics and photonics, including 18 prestigious journals, the society’s flagship member magazine, and papers and videos from more than 835 conferences. With over 400,000 journal articles, conference papers and videos to search, discover and access, our publications portfolio represents the full range of research in the field from around the globe.

About Optics Express

Optics Express reports on scientific and technology innovations in all aspects of optics and photonics. The bi-weekly journal provides rapid publication of original, peer-reviewed papers. It is published by Optica Publishing Group and led by Editor-in-Chief James Leger of the University of Minnesota, USA. Optics Express is an open-access journal and is available at no cost to readers online.  For more information, visit Optics Express.

Media Contact

mediarelations@optica.org

END