(Press-News.org) Tungsten carbide–cobalt (WC–Co) is prized for its hardness, but that same property makes it unusually difficult to shape. The current process is wasteful and expensive for the yield produced, and an economically sensible method for creating these materials is long overdue.
WC-Co cemented carbides are important in fields that require high wear resistance and hardness, such as cutting and construction tools. Currently, these carbides are made using powder metallurgy, utilizing high pressure and sintering machines to combine the WC and Co powders to yield a manufactured cemented carbide. Though this method does produce highly durable and hard final products, a lot of expensive material is used, and the yield is suboptimal. The research proposed in this study utilizes the novel technique of additive manufacturing (AM, also commonly known as 3D printing) and the hot-wire laser irradiation method to produce cemented carbides without sacrificing hardness and durability, while also reducing material waste and overall cost.
The study was published online in December 2025 in the International Journal of Refractory Metals and Hard Materials and will appear in the journal’s April 2026 print issue.
The study focuses on the use of AM, specifically hot-wire laser irradiation, along with two fabrication methods for their experiment. Firstly, hot-wire laser irradiation (also called laser hot-wire welding) is a technique in which a laser beam and a preheated filler wire are combined to increase the deposition rate (how much of the filler metal is added) and efficiency of the process.
One fabrication method used in this study involves direct irradiation on top of the cemented carbide rod, with the rod leading the direction of fabrication. The other method is led by the laser and is irradiated by the laser between the bottom of the cemented carbide rod and the base material (iron). In both methods, the metals are softened instead of completely melted to form the cemented carbide.
“Cemented carbides are extremely hard materials used for cutting tool edges and similar applications, but they are made from very expensive raw materials such as tungsten and cobalt, making reduction of material usage highly desirable. By using additive manufacturing, cemented carbide can be deposited only where it is needed, thereby reducing material consumption,” said corresponding author Keita Marumoto, assistant professor at Hiroshima University’s Graduate School of Advanced Science and Engineering.
Defect-free, industrial-grade carbides achieved
The results demonstrated this method to be effective in maintaining the hardness and mechanical integrity of conventionally manufactured WC-Co cemented carbides, achieving a base material with hardness of over 1400 HV (a unit representing resistance to penetration), without introducing any defects or decomposition. Materials at this hardness level rank among the toughest used in industry, just below superhard substances such as sapphire and diamond. Producing the cemented carbide molds without defects does appear possible, which is the main goal of this study, though some results vary.
For example, the rod-leading method appears to lead to the decomposition of WC on the upper part of the build, leading to defects in the final product. The laser leading method also had issues maintaining the hardness necessary for success. A nickel alloy-based middle layer was added, and that, along with maintenance and monitoring of temperatures (above the melting point for cobalt, below the temperature of grain growth) lead to a cemented carbide produced via AM without sacrificing material hardness.
The promising results are a springboard for improving upon their work. Researchers would like to see their work here progress to manage the issue of cracking, as well as form more complex shapes.
“The approach of forming metal materials by softening them rather than fully melting them is novel, and it has the potential to be applied not only to cemented carbides, which were the focus of this study, but also to other materials,” said Marumoto.
Eventually, fabricating cutting tools, exploring the use of other materials, and further investigating how to improve durability are of top concern for the future of this research.
Keita Marumoto and Motomichi Yamamoto of the Graduate School of Advanced Science and Engineering at Hiroshima University and Takashi Abe, Keigo Nagamori, Hiroshi Ichikawa and Akio Nishiyama of the Mitsubishi Materials Hardmetal Corporation contributed to this research.
###
About Hiroshima University
Since its foundation in 1949, Hiroshima University has striven to become one of the most prominent and comprehensive universities in Japan for the promotion and development of scholarship and education. Consisting of 12 schools for undergraduate level and 5 graduate schools, ranging from natural sciences to humanities and social sciences, the university has grown into one of the most distinguished comprehensive research universities in Japan. English website: https://www.hiroshima-u.ac.jp/en
END
Researchers find a way to 3D print one of industry’s hardest engineering materials
2026-02-06
ELSE PRESS RELEASES FROM THIS DATE:
Coupling dynamic effect based on the molecular sieve regulation of Fe nanoparticles
2026-02-06
Iron-based molecular sieves show great promise for high-temperature NH3-SCR due to their intrinsic shape selectivity and thermal stability. However, excessive ammonia oxidation at high temperatures limits NOx conversion and long-term stability, and its kinetic transition remains poorly understood. A team led by Zhiqiang Sun, Hanzi Liu, and Xinlin Xie has developed a high-temperature Fe@ZSM-5 catalyst and established a coupled kinetic model to describe ammonia oxidation behavior at high temperatures. Their work is published in the journal Industrial Chemistry & Materials on December 2025.
The authors synthesized HZSM-5 zeolites via ...
Engineering the “golden bridge”: Efficient tunnel junction design for next-generation all-perovskite tandem solar cells
2026-02-06
WUHAN, CHINA — A research team from the Wuhan National Laboratory for Optoelectronics (WNLO) and the School of Optical and Electronic Information at Huazhong University of Science and Technology (HUST) has reported a new advancement in all-perovskite tandem solar cells. By utilizing quantitative Silvaco TCAD simulations, the team has elucidated the fundamental physics of the tunnel junction, providing a definitive design rule to overcome efficiency bottlenecks in all-perovskite tandem solar cells.
The Bottleneck: Unbalanced Charge Tunneling
All-perovskite tandem solar cells are a high-potential technology ...
Understanding how cancer cells use water pressure to move through the body
2026-02-06
Fukuoka, Japan—Cancer is one of the leading causes of death worldwide, marked by the uncontrolled growth of abnormal cells. What makes it more dangerous is the ability of cancer cells to move quickly through the body, allowing them to invade surrounding tissues. While this behavior is well known, the mechanism behind this rapid spread remains unclear. Researchers from Kyushu University set out to fill this gap and unveiled a new physical process that helps cancer cells move rapidly throughout the body.
This study was led by Professor Junichi Ikenouchi from Kyushu University’s Faculty of Medical Sciences, along with his colleagues at Kyushu University, in collaboration with ...
Killing cancer cells with RNA therapeutics
2026-02-06
COLUMBUS, Ohio – A new study in mice hints at the potential to use tiny particles made with RNA molecules to deliver chemotherapy drugs and other therapies directly to tumors, killing cancer cells without generating an immune response or toxicity-related side effects.
Researchers constructed tiny molecular clusters called RNA micelles, loaded them with potent chemo drugs and an RNA molecule that blocks cancer survival, and placed a tumor targeting molecule on their outer wall that attaches to receptors on cancer cell surfaces to enhance delivery.
Treatment with these RNA micelles almost ...
Mechanism-guided prediction of CMAS corrosion resistance and service life for high-entropy rare-earth disilicates
2026-02-06
Materials scientists have long sought to enhance the durability of thermal/environmental barrier coatings (T/EBCs) under extreme conditions, particularly against corrosion caused by calcium‑magnesium‑alumino‑silicate (CMAS) melts. Understanding the corrosion mechanisms and accurately predicting the long‑term service life of coating materials remain critical challenges for aerospace and energy applications.
Recently, a research team from Harbin Institute of Technology and Shanghai University achieved a significant breakthrough. They designed two novel high‑entropy rare‑earth disilicates—(Er1/4Y1/4Lu1/4Yb1/4)2Si2O7 and ...
Seeing the unseen: Scientists demonstrate dual-mode color generation from invisible light
2026-02-06
Invisible light beyond the range of human vision plays a vital role in communication technologies, medical diagnostics, and optical sensing. Ultraviolet and near-infrared wavelengths are routinely used in these fields, yet detecting them directly often requires complex instrumentation. Developing materials that can convert invisible light into visible signals could serve as essential components for measurement technologies and sensors, and play a major role in understanding the fundamental photophysical processes. However, developing those materials remains a key challenge in ...
Revealing deformation mechanisms of the mineral antigorite in subduction zones
2026-02-06
Earth’s surface is covered by more than a dozen tectonic plates, and in subduction zones around the world—including the Japanese Islands—plates converge and dense oceanic plates sink into the Earth’s interior. These regions, especially plate boundaries, are known for frequent seismic activity. In recent years, scientists have increasingly emphasized that water plays a crucial role in earthquake phenomena in subduction zones, and thus conducted active research to investigate the influence of water on various processes occurring within earthquake source regions.
When water is supplied, peridotite—the primary constituent of ...
I’m walking here! A new model maps foot traffic in New York City
2026-02-06
Early in the 1969 film “Midnight Cowboy,” Dustin Hoffman, playing the character of Ratso Rizzo, crosses a Manhattan street and angrily bangs on the hood of an encroaching taxi. Hoffman’s line — “I’m walking here!” — has since been repeated by thousands of New Yorkers. Where cars and people mix, tensions rise.
And yet, governments and planners across the U.S. haven’t thoroughly tracked where it is that cars and people mix. Officials have long measured vehicle traffic closely while largely ignoring pedestrian traffic. Now, an MIT research group has assembled a routable dataset of sidewalks, ...
AI model can read and diagnose a brain MRI in seconds
2026-02-06
An AI-powered model developed at University of Michigan can read a brain MRI and diagnose a person in seconds, a study suggests.
The model detected neurological conditions with up to 97.5% accuracy and predicted how urgently a patient required treatment.
Researchers say the first-of-its-kind technology could transform neuroimaging at health systems across the United States.
The results are published in Nature Biomedical Engineering.
“As the global demand for MRI rises and places significant strain our physicians and health systems, our AI model has potential to reduce burden by improving diagnosis and treatment with fast, accurate ...
Researchers boost perovskite solar cell performance via interface engineering
2026-02-06
Researchers from the Qingdao Institute of Bioenergy and Bioprocess Technology (QIBEBT) of the Chinese Academy of Sciences, in collaboration with international partners, have engineered a thin two-dimensional perovskite phase at the buried interface of three-dimensional (3D) perovskite solar cells (PSCs) to boost device performance and operational stability.
The method, published in Nature Energy on February 6, improves the crystallization quality of perovskite films and reduces defect concentrations at the buried interfaces by more than 90 percent (a tenfold ...