Rebar technique strengthens case for graphene

(Press-News.org) Carbon nanotubes are reinforcing bars that make two-dimensional graphene much easier to handle in a new hybrid material grown by researchers at Rice University.

The Rice lab of chemist James Tour set nanotubes into graphene in a way that not only mimics how steel rebar is used in concrete but also preserves and even improves the electrical and mechanical qualities of both.

The technique should make large, flexible, conductive and transparent sheets of graphene much easier to manipulate, which should be of interest to electronics manufacturers, Tour said. He suggested the new hybrid could, upon stacking in a few layers, be a cost-effective replacement for expensive indium tin oxide (ITO) now used in displays and solar cells.

The research appears this month in the American Chemical Society journal ACS Nano.

Graphene, a single-layer matrix of carbon atoms, may be one of the strongest materials on the planet, but it can be a challenge to lift the tiny sheets from the catalyst substrate on which they're grown, generally by chemical vapor deposition (CVD), Tour said.

"Normally you grow graphene on a metal, but you can't just dissolve away the metal," Tour said. "You put a polymer on top of the graphene to reinforce it, and then dissolve the metal.

"Then you have polymer stuck to the graphene. When you dissolve the polymer, you're left with residues, trace impurities that limit graphene's effectiveness for high-speed electronics and biological devices. By taking away the polymer support step, we greatly expand the potential for this material."

To create what they call rebar graphene, the researchers simply spin-coat and then heat and cool functionalized single- or multiwalled carbon nanotubes on copper foils, using the nanotubes themselves as the carbon source. When heated, the functional carbon groups decompose and form graphene, while the nanotubes partially split and form covalent junctions with the new graphene layer.

"The nanotubes actually become one with the material in certain places," Tour said. "It's a true hybrid with in-plane nanotubes covalently bonded to graphene."

The interconnected, embedded nanotubes strengthen the graphene, Tour said. "We can see in our images how well the nanotubes bear the load. When we stretch the material, the tubes get thinner," he said. Because the electron microscope images let them determine the nanotubes' chirality – the angles of the hexagons that make up the tube -- the researchers were able to calculate the tubes' diameters and know precisely how much thinner they get under tension.

The networked nanotubes also make the material a better conductor than standard CVD-grown graphene, Tour said. Graphene as grown is never a perfect matrix of hexagons; instead, it consists of crystals that grow separately and connect at grain boundaries that disrupt the flow of electrons. The nanotubes in rebar graphene effectively bridge those boundaries.

"The big thing for industry is to see if they can get graphene to substitute for ITO for transparent displays," Tour said. "But ITO is rigid, and it breaks when you drop your smartphone, for example. Graphene and nanotubes, on the other hand, would afford flexible displays. We showed in our tests that rebar graphene has better conductivity than normal graphene at the same transparency, and with layering, it could be ITO-competitive."

INFORMATION: Rice graduate alumnus Zheng Yan, now a postdoctoral researcher at the University of Illinois, is lead author of the paper. Co-authors are postdoctoral researchers Jian Lin, Haiqing Zhou and Yang Yang; graduate students Zhiwei Peng, Changsheng Xiang, Gedeng Ruan, Abdul-Rahman Raji and Errol Samuel; and Robert Hauge, a distinguished faculty fellow in chemistry, all at Rice. Other co-authors are Gilberto Casillas, a graduate student, and Miguel Jose Yacaman, a professor and chair of the Department of Physics and Astronomy, both at the University of Texas at San Antonio. Hauge is also a member of the chemistry faculty at King Abdulaziz University, Saudi Arabia. Tour is the T.T. and W.F. Chao Chair in Chemistry as well as a professor of mechanical engineering and materials science and of computer science.

The Office of Naval Research Multidisciplinary University Research Initiative (MURI), the Air Force Office of Scientific Research and its MURI program, the National Center for Research Resources and Health Disparities of the National Institutes of Health and the National Science Foundation supported the research.

Read the abstract at http://pubs.acs.org/doi/abs/10.1021/nn501132n

Follow Rice News and Media Relations via Twitter @RiceUNews

Related Materials:

Tour Group: http://www.jmtour.com

The Richard E. Smalley Institute for Nanoscale Science and Technology: http://cnst.rice.edu

Images for download:

http://news.rice.edu/wp-content/uploads/2014/04/0407_REBAR-1-web.jpg

Graphene transferred from its metal substrate with a polymer coating, left, shows polymer residues (dark spots) remain stuck to the graphene after processing. The rebar graphene, right, created at Rice University is created without the need for a polymer transfer step and stays clean. (Credit: Tour Group/Rice University)

http://news.rice.edu/wp-content/uploads/2014/04/0407_REBAR-2-web.jpg

Nanotube rebars are clearly visible in an electron microscope image of rebar graphene invented at Rice University. The image shows where one nanotube wall stops, as the tube partially unzips into graphene and provides a seamless bond with the sheet. (Credit: Tour Group/Rice University)

http://news.rice.edu/wp-content/uploads/2014/04/0407_REBAR-3-web.jpg

Carbon nanotubes that serve as reinforcing bars in graphene partially unzip in the process created at Rice University. The unzipped part of the tube bonds covalently with the graphene sheet, providing an uninterrupted electrical connection. (Credit: Tour Group/Rice University)

http://news.rice.edu/wp-content/uploads/2014/04/0407_REBAR-4-web.jpg

Nanotubes with added carbon side chains are spin coated onto a substrate and heated to form rebar graphene in a process invented at Rice University. The rebars add strength and electrical connectivity to the transparent, flexible sheet that could replace more expensive materials in displays and solar cells. (Credit: Tour Group/Rice University)

http://news.rice.edu/wp-content/uploads/2014/04/0407_REBAR-5-web.jpg

A square-centimeter sheet of rebar graphene floats in water. The rebars allow the sheet to be transferred from one surface from another without using polymer in an intermediate step. The process was created in the lab of chemist James Tour at Rice University. (Credit: Tour Group/Rice University)

Located on a 300-acre forested campus in Houston, Rice University is consistently ranked among the nation's top 20 universities by U.S. News & World Report. Rice has highly respected schools of Architecture, Business, Continuing Studies, Engineering, Humanities, Music, Natural Sciences and Social Sciences and is home to the Baker Institute for Public Policy. With 3,920 undergraduates and 2,567 graduate students, Rice's undergraduate student-to-faculty ratio is 6.3-to-1. Its residential college system builds close-knit communities and lifelong friendships, just one reason why Rice has been ranked No. 1 for best quality of life multiple times by the Princeton Review and No. 2 for "best value" among private universities by Kiplinger's Personal Finance.