IEEE study describes polymer waveguides for reliable, high-capacity optical communication
Researchers have found that glass-epoxy-based waveguides have characteristics that make them ideal for transmitting optical signals in co-packaged optics
2025-06-06
(Press-News.org)
Co-packaged optics (CPO) technology can integrate photonic integrated circuits (PICs) with electronic integrated circuits (EICs) like CPUs and GPUs on a single platform. This advanced technology has immense potential to improve data transmission efficiency within data centers and high-performance computing environments. CPO systems require a laser source for operation, which can be either integrated directly into the silicon photonic chips (integrated laser sources) or provided externally. While integrated laser sources allow for dense CPO integration, ensuring consistent reliability can be challenging, which may affect overall system robustness. The use of external laser sources (ELS) in CPO, in comparison, offers improved system reliability.
Single-mode polymer waveguides are crucial components of many PICs, where they help couple light from an external laser to the PIC or distribute optical signals within the system. They are cost-effective and mechanically flexible, besides being highly compatible with electrical circuits. Therefore, they show significant potential for use in CPO systems utilizing ELS.
Now, a team of researchers led by Dr. Satoshi Suda from the National Institute of Advanced Industrial Science and Technology, Japan have tested the stability and reliability of single-mode polymer waveguides fabricated on glass-epoxy substrates. Their findings published in IEEE Journal of Lightwave Technology, suggest that these polymer waveguides have a range of desirable characteristics that make them a promising addition to future CPO systems.
“Polymer waveguides show strong potential for use in demanding CPO systems. We, therefore, evaluated the fundamental optical properties of the single-mode polymer waveguides on glass epoxy substrate”, explains Dr. Suda.
The team fabricated 11-mm-long polymer waveguides using direct laser writing on FR4 glass-epoxy substrates. The waveguides had well-controlled core dimensions (9.0 µm × 7.0 µm), suitable for matching standard single-mode fibers. They exhibited low polarization-dependent loss (PDL) and low differential group delay (DGD), along with excellent uniformity across eight fabricated samples.
Waveguides with low PDL and low DGD can help facilitate stable signal transmission within CPO systems by minimizing distortions. The researchers found that the fabricated waveguides possess consistent insertion loss and mode field dimensions. Low variations in insertion loss and mode field dimensions between waveguides suggest that they can function as energy-efficient optical interconnects, making them suitable for adoption in CPO systems.
In addition, the waveguides fabricated on glass-epoxy substrates exhibited desirable polarization extinction ratio (PER) (a critical metric that reflects the ability of waveguides to maintain a specific polarization for the signals they transmit). The team measured PER at all wavelengths within the CWDM4 standard, specifically at 1271, 1291, 1311, and 1331 nm and observed a high PER of more than 20 dB across all CWDM4 wavelengths, meeting OIF specifications for ELS-based CPO systems.
Moreover, the testing of glass-epoxy-based waveguides under high-power conditions revealed that the waveguides were resistant to power degradation even after six hours of continuous use, while showing minimal heating concerns. The ELS used in these experiments, which enabled stable operation for six hours, was provided by Furukawa Electric Co., Ltd.
“These findings demonstrate the strong potential of polymer waveguides for practical deployment in demanding CPO systems, providing a reliable foundation for next-generation high-density and high-capacity optical communication technologies,” concludes Dr. Suda.
***
Reference
Authors: Satoshi Suda et al.
DOI: 10.1109/JLT.2025.3543339
Affiliations: National Institute of Advanced Industrial Science and Technology (AIST), Japan
END
ELSE PRESS RELEASES FROM THIS DATE:
2025-06-06
Boron, though required only in minimal amounts, is vital for plant development. It strengthens cell walls and supports the growth of roots and shoots. Normally, boron, in the form of boric acid, is passively absorbed by plant roots and transported throughout the plant via diffusion. However, boron is often scarce in soil, particularly in arid regions, making passive absorption impossible. To combat this, plants have evolved proteins that actively transport boron from the soil into the plant. In Arabidopsis thaliana, the protein AtNIP5;1—a boric acid channel ...
2025-06-06
We have all heard of antibodies – proteins produced by our bodies to bind to viruses or bacteria, marking them for elimination by the immune system. But not all of us are familiar with aptamers: short segments of DNA or RNA that are designed to bind, like antibodies, to specific targets. Synthetic and inexpensive to produce, aptamers are attractive alternatives to antibodies for biomedical diagnostics and therapeutics.
When new aptamer binders are needed, for example to detect a new virus, they are developed from libraries of millions of nucleic acid sequences from which the best matches for a given target are selected and amplified. ...
2025-06-06
CAMBRIDGE, MA -- When navigating a place that we’re only somewhat familiar with, we often rely on unique landmarks to help make our way. However, if we’re looking for an office in a brick building, and there are many brick buildings along our route, we might use a rule like looking for the second building on a street, rather than relying on distinguishing the building itself.
Until that ambiguity is resolved, we must hold in mind that there are multiple possibilities (or hypotheses) for where we are in relation to our destination. In a study of mice, MIT neuroscientists have now discovered that these hypotheses are explicitly represented in the brain ...
2025-06-06
A new AI tool to predict the spread of infectious disease outperforms existing state-of-the-art forecasting methods.
The tool, created with federal support by researchers at Johns Hopkins and Duke universities, could revolutionize how public health officials predict, track and manage outbreaks of infectious diseases including flu and COVID-19.
“COVID-19 elucidated the challenge of predicting disease spread due to the interplay of complex factors that were constantly changing,” said author ...
2025-06-06
During the first meeting of the Global Think-tank on Steatotic Liver Disease, supported by the Barcelona Institute for Global Health (ISGlobal) and held in the Palau Macaya of Barcelona on 5–6 June, more than 100 international experts issued a stark warning: millions of people will continue to go unseen by healthcare systems unless early detection and person-centred care for liver disease are prioritised without delay.
A common but invisible disease
Metabolic dysfunction-associated steatotic liver disease (MASLD) affects around 33% of adults globally. Its more aggressive form, metabolic dysfunction-associated steatohepatitis (MASH), is estimated to affect 5% of the general ...
2025-06-06
Tokyo, Japan – Hailed as one of the greatest inventions of the 20th century, transistors are integral components of modern electronics that amplify or switch electrical signals. As electronics become smaller, it is becoming increasingly difficult to continue scaling down silicon-based transistors. Has the development of our electronics hit a wall?
Now, a research team led by the Institute of Industrial Science, The University of Tokyo, has sought a solution. As detailed in their new paper, to be issued in 2025 Symposium on VLSI Technology and Circuits , the team ditched the silicon and instead opted to create a transistor made from gallium-doped ...
2025-06-06
Highlights
- Development of the world's first practical surface-emitting laser suitable for optical fiber communications systems.
- Utilization of quantum dots as an optical gain medium, enabled by NICT's high-precision crystal growth technology and Sony's advanced processing technology.
- A significant advancement toward miniaturization, reduced power consumption, and cost efficiency of light sources used in optical fiber communication systems.
Abstract
The National Institute of Information ...
2025-06-06
Sepsis is when the immune system overshoots its inflammatory reaction to an infection, so strongly that the vital organs begin to shut down. It is life-threatening: each year in the US alone, approximately 750,000 patients are hospitalized for sepsis, of which approximately 27% die. In about 15% of cases, sepsis worsens into septic shock, characterized by dangerously low blood pressure and reduced blood flow to tissues. The risk of death from septic shock is even higher, between 30% and 40%.
The earlier patients with sepsis are treated, the better their prospects. Typically, they receive ...
2025-06-06
Dual Breakthroughs in Diabetes Cure and Organ Regeneration Redefine Medical Frontiers
NANJING, China – In a revolutionary one-two punch, Chinese research teams have successfully engineered the human spleen into a living bioreactor capable of curing diabetes and growing functional organs – achievements published back-to-back in Science Translational Medicine and Diabetes this month. This convergence of discoveries positions the long-underestimated spleen as a game-changing platform for regenerative medicine.
The Spleen Solution: From Biological Filter to Life-Saving Factory
Once considered expendable, the spleen now emerges as the body’s ...
2025-06-06
A Cambridge criminologist has uncovered new evidence in the killing of a priest, John Forde, who had his throat cut on a busy London street almost seven centuries ago.
The case is among hundreds catalogued by the Medieval Murder Maps project at Cambridge University’s Institute of Criminology, a database of unnatural death in England during the 14th century. This one, however, has a few twists.
Records traced by Prof Manuel Eisner suggest that John Forde’s slaying in 1337 was a revenge killing orchestrated by a noblewoman ordered to enact years of degrading penance after the Archbishop of Canterbury discovered the clergyman was her lover – possibly from ...
LAST 30 PRESS RELEASES:
[Press-News.org] IEEE study describes polymer waveguides for reliable, high-capacity optical communication
Researchers have found that glass-epoxy-based waveguides have characteristics that make them ideal for transmitting optical signals in co-packaged optics
