Securing new metal 3D printing technology that drives the renaissance of the manufacturing industry!

KIMS and other joint research teams, Develop metal 3D printing pen additive manufacturing source technology

2023-03-27

(Press-News.org) □ A research team led by Dr. Sang-woo Song, Dr. Chan-kyu Kim, Dr. Kang-myung Seo at the Department of Joining Technology of the Korea Institute of Materials Science(KIMS), a government-funded research institute under the Ministry of Science and ICT, has developed a foundational technology for controlling the volume of molten metal in the process of 3D printing metal using welding techniques. They achieved this through collaborative research with a research team led by Professor Young-tae Cho and Professor Seok Kim of the Department of Mechanical engineering at Changwon National University, and a research team led by Dr. Dae-won Cho of Busan Machinery Research Center at the Korea Institute of Machinery & Materials. As a result, they have successfully developed a metal 3D printing pen technology that can continuously print metal in a three-dimensional space with freedom.

□ The metal 3D printing pen technology developed by the research team has the advantage of being able to freely and continuously print metal with freedom in the direction of the welding torch's movement in 3D space. Compared to conventional metal 3D printing using lasers, the equipment construction cost is low, and additive manufacturing can be performed quickly using commercially available welding materials, making it more economical.

□ Metal additive manufacturing using welding techniques has limitations in realizing complex structures because it is a limited process of building one layer at a time. This is because subsequent layers are laminated after complete solidification preventing the molten metal from flowing down. Due to this, there is a disadvantage in that a cooling time is required and the conditions that can be laminated are limited to specific examples. To solve this problem, the research team performed computer analysis to calculate and precisely control the surface tension of the molten metal and the solidified volume according to convection/conduction. Additionally, they developed a technology that can perform metal additive manufacturing in all conditions, including horizontal, vertical, inclined, and overhead positions. By continuously laminating the metal in the liquid phase before it fully solidifies, the manufacturing time is shortened, there is no boundary between layers, and it forms a dense microstructure with excellent mechanical properties.

※ In the case of ductility, 24.5% improvement compared to the existing WAAM (Wire Arc Additive Manufacturing) process, based on Inconel 625 (WAAM: welding and additive manufacturing (AM) of wire-type materials using an arc heat source)

□ As of 2021, the size of the 3D printer market at home and abroad is KRW 82.1 billion and USD 2.1 billion, respectively, with annual average growth rates of 10.5% and 20%. This research achievement is expected to give vitality to the manufacturing industry by preoccupying technological superiority in the field of metal additive manufacturing and manufacturing high-value-added machines and parts using it.

□ “We added 3D free-form additive manufacturing to the continuous additive manufacturing process, which was considered impossible in the existing metal additive manufacturing process,” said Sang-woo Song, principal researcher at KIMS, who is in charge of the research. He continued, “Like the existing 3D printing technology using polymers, it is possible to easily manufacture complex structures using existing metal welding materials, suggesting a new paradigm for the manufacturing industry.”

□ This research result was carried out as a project of ‘Development of Multi-metallic Layer Materials for Multi-purpose Micro Modular Reactor’ by the Korea Institute of Materials Science with the support of the Ministry of Science and ICT. In addition, the research results were selected as a cover paper in the February issue of Advanced Science (IF=17.521), a world-renowned academic journal. Currently, the research team is continuing follow-up research for additive manufacturing of high-value-added machinery and parts in the nuclear power plant and defense industries.

-------------------------------------------------------------------------

###

About Korea Institute of Materials Science(KIMS)

KIMS is a non-profit government-funded research institute under the Ministry of Science and ICT of the Republic of Korea. As the only institute specializing in comprehensive materials technologies in Korea, KIMS has contributed to Korean industry by carrying out a wide range of activities related to materials science including R&D, inspection, testing&evaluation, and technology support.

END

[Attachments] See images for this press release:

Securing new metal 3D printing technology that drives the renaissance of the manufacturing industry! 2

ELSE PRESS RELEASES FROM THIS DATE:

Advanced technologies for longer-lasting electric vehicles

2023-03-27

Owing to the worldwide trend of utilizing electric vehicles, there has been a rise in demand for next-generation secondary batteries with higher capacity and faster charging than the lithium-ion batteries currently in use. Lithium metal batteries have been recognized as promising rechargeable batteries because lithium metal anode exhibits theoretical capacity 10 times higher than commercial graphite anode. During charging-discharging processes, however, lithium dendrites grow on the anode, leading to poor battery performance and short-circuit. Dr. Sungho Lee, Head of the ...

The genetics of temperature adaptation: how does life thrive in extreme conditions?

2023-03-27

The history of the Earth has been one of physical extremes—extreme atmospheric conditions, extreme chemical environments, and extreme temperatures. There was a time when the Earth was so hot all the water was vapor, and the first rain only fell once the planet cooled enough. Soon after, life emerged and through it all, life has found a way. Today life is found almost everywhere on Earth we have looked; it is difficult to find places where life does not exist. The remarkable ability of life to adapt to variable conditions is one of its defining characteristics. Of its many adaptations, the ability of life to adapt to varying temperatures ...

Opening up a different conversation about violence

2023-03-27

20 years on from the invasion of Iraq, nearly 25 years since the Good Friday Agreement in Northern Ireland, and in the midst of war in Ukraine and contested questions about migration and the legacies of war, a brand new Centre for the Study of Violence will launch this week at the University of Bath. Led by academics across the University’s Faculty of Humanities & Social Sciences, including political theorists, development and humanitarian scholars, plus crime, defence and security experts, the new Centre will be the first of its kind in the UK. It aims to help society rethink how violence operates and to find ways to imagine a more peaceful world. The Centre ...

Students who played sports before the pandemic did better during lockdowns

2023-03-27

A history of participating in campus recreational sports can offset stress and contribute to academic competence even during high-stress periods such as a pandemic lockdown, shows a new study. Researchers at the University of Waterloo found that participation in activities such as fitness classes and intramural and drop-in sports before the pandemic was linked to lower levels of stress and higher levels of perceived competence to handle challenges and master school workload during the lockdown. The study used factor and regression analyses based on self-reported ...

What do the elements sound like? (video)

2023-03-26

INDIANAPOLIS, March 26, 2023 — In chemistry, we have He, Fe and Ca — but what about do, re and mi? Hauntingly beautiful melodies aren’t the first things that come to mind when looking at the periodic table of the elements. However, using a technique called data sonification, a recent college graduate has converted the visible light given off by the elements into audio, creating unique, complex sounds for each one. Today, the researcher reports the first step toward an interactive, musical periodic table. The researcher will present his results at the spring meeting of the American Chemical Society (ACS). ACS Spring 2023 is a hybrid meeting ...

Colorful films could help buildings, cars keep their cool

2023-03-26

INDIANAPOLIS, March 26, 2023 — The cold blast of an air conditioner can be a welcome relief as temperatures soar, but “A/C” units require large amounts of energy and can leak potent greenhouse gases. Today, scientists report an eco-friendly alternative — a plant-based film that gets cooler when exposed to sunlight and comes in a variety of textures and bright, iridescent colors. The material could someday keep buildings, cars and other structures cool without requiring external power. The researchers will present their results at the spring meeting of the American Chemical Society (ACS). ACS Spring 2023 is a hybrid meeting being held virtually and in-person March 26–30 ...

New ways to measure curls and kinks could make it easier to care for natural hair

2023-03-26

INDIANAPOLIS, March 26, 2023 — Black women and others with curly or kinky hair encounter a vast and confusing array of haircare options. Advice on the best products to use for a certain type of hair is often contradictory, and the results can be highly variable. Now, scientists are bringing order to this chaos by identifying properties such as the number of curls or coils in a given length of hair that could eventually help users pick the perfect product and achieve consistent results. The researchers will present their findings today at the spring meeting of the American Chemical Society (ACS). ACS Spring 2023 is a hybrid meeting being held virtually and in-person ...

Two meteorites are providing a detailed look into outer space

2023-03-26

INDIANAPOLIS, March 26, 2023 — If you’ve ever seen a shooting star, you might have actually seen a meteor on its way to Earth. Those that land here are called meteorites and can be used to peek back in time, into the far corners of outer space or at the earliest building blocks of life. Today, scientists report some of the most detailed analyses yet of the organic material of two meteorites. They’ve identified tens of thousands of molecular “puzzle pieces,” including a larger amount of oxygen atoms than they had expected. The researchers will present their results at the spring meeting of the American Chemical Society ...

The more traumatic the childhood, the angrier the adult

2023-03-26

Scientists have found that depression and anxiety sufferers who have had a traumatic childhood tend to grow up as angry adults, and the worse the trauma, the angrier the adult. This can affect personal mental health and social interaction, but also makes it more difficult to treat the depression and anxiety. This work is presented at the European Congress of Psychiatry in Paris. Previously, the researchers had found that more than 40% of patients with both anxiety and depression had a tendency towards anger. This compares to only around 5% of healthy controls. The present ...

Scientists show that odors from other people’s sweat can help treat social anxiety

2023-03-26

A group of European researchers have shown that exposure to human odours, extracted from other people’s sweat, might be used to boost treatment for some mental health problems. In a preliminary study, the researchers were able to show that social anxiety was reduced when patients underwent mindfulness therapy while exposed to human ‘chemo-signals’, or what we commonly refer to as body odour, obtained from underarm sweat from volunteers. Presenting the results of a pilot study at the European Congress of Psychiatry in Paris, lead researcher Ms Elisa Vigna, of the Karolinska Institute in Stockholm said: “Our state of mind causes us to produce molecules ...

Securing new metal 3D printing technology that drives the renaissance of the manufacturing industry!

ELSE PRESS RELEASES FROM THIS DATE:

LAST 30 PRESS RELEASES: