(Press-News.org) The Smart 3D Printing Research Team at KERI, led by Dr. Seol Seung-kwon, has developed the world’s first technology for printing high-resolution 3D microstructures using 'MXene,' a material known as the dream material.
MXene, first discovered in the United States in 2011, is a two-dimensional nanomaterial composed of alternating metal and carbon layers. MXene possesses high electrical conductivity and electromagnetic shielding capabilities. Due to its easy combination with various metal chemicals, MXene has gained significant attention in fields such as high-efficiency batteries and electromagnetic shielding.
However, applying MXene in the field of 3D printing requires additional additives (binders), and there has been the challenge of finding the optimal ink viscosity1) (concentration)to make printing possible. In other words, if the amount of MXene was too high, the high-concentration ink would clog the pipette2) nozzle. Conversely, if the amount of MXene was significantly reduced, there was a limitation in being able to print the desired structures. Furthermore, the additives also had the drawback of damaging the original properties of MXene.
1) Viscosity : A unit that refers to the thickness or stickiness of a liquid.
2) Pipette: An instrument used to transfer a precise volume of liquid, similar to a very precise laboratory ‘dropper’.
To solve these problems, Dr. Seol Seung-kwon’s team used their unique 'Meniscus' method. The Meniscus effect occurs when a droplet is gently pressed or pulled with a constant pressure, causing the droplet to form a curved surface on the outer wall without bursting due to capillary action. The researchers at KERI successfully developed a 3D printing nano ink by dispersing highly hydrophilic MXene in water without the use of a binder, enabling the printing of high-resolution microstructures even with low viscosity.
The principle of printing is simple. First, when the ink is ejected from the 3D printer nozzle, nanomaterials like MXene are sprayed out through the Meniscus, which acts as a channel. At this point, the water (solvent) quickly evaporates from the meniscus surface of the ink, and strong intermolecular forces (Van Der Waals forces) cause the nanoparticles to bind together. By continuously performing this process while moving the nozzle, a conductive 3D microstructure is created.
This achievement was made by maximizing the properties of MXene without any additives, and the results were outstanding. The printing resolution was an impressive 270 times higher than existing technologies, at 1.3 µm (micrometers), which is about 1/100th of the thickness of a human hair.
The miniaturization of 3D printed structures has led to a significant improvement in the performance and applicability of electrical and electronic device. If applied in fields such as batteries and energy storage devices, it can increase the surface area and integration density of the structures, maximizing ion transfer efficiency and boosting energy density. If this is applied in the field of electromagnetic shielding, it can enhance performance by amplifying the internal multiple reflections and absorption effects. Additionally, when this technology is applied to manufacture various sensors, improvements in sensitivity and efficiency can be expected.
Dr. Seol Seung-kwon stated, "We put a lot of effort into optimizing the concentration conditions of MXene ink and precisely analyzing the various parameters that could arise during the printing process." He further remarked, "Our technology is the world's first achievement that allows the creation of high-strength, high-precision 3D microstructures by leveraging the advantages of MXene without the need for any additives or post-processing."
The results of this research have been highly praised and recently selected as the cover article in *Small*, a prestigious international materials science journal published by Wiley, Germany ( Top 7% of JCR , IF=13). KERI plans to actively seek out demand companies for the commercialization of its developed technologies. Additionally, KERI's goal is to lead the related market by utilizing nano-ink-based 3D printing technology, as the demand for ultra-small, flexible electronic devices that are not limited by physical form factors(Form-Factor Free) is rapidly increasing.
Meanwhile, KERI is a government-funded research institute under the National Research Council of Science & Technology (NST) of the Ministry of Science and ICT. This research was conducted as part of KERI's fundamental projects and the Ministry of Science and ICT's project titled 'The Development of Materials and Process Technology for Humanoid Skeletal Customized 3D Printed Circuit Boards Enabling Real-Time Human-Robot Interaction.' Dr. Seol also serves as a professor at KERI campus of the University of Science and Technology (UST). <KERI>
END
Opening a new chapter in 3D microprinting with the dream material 'MXene'!
2025-03-12
[Attachments] See images for this press release:
ELSE PRESS RELEASES FROM THIS DATE:
Temperature during development influences connectivity between neurons and behavior in fruit flies
2025-03-12
The rate of development of poikilothermic animals, such as insects, fish, and reptiles, is determined by environmental temperature. A research team at Johannes Gutenberg University Mainz (JGU) has recently demonstrated how temperature can affect brain development in fruit flies. "In the area of the brain we examined, neurons formed more synapses and connected to more synaptic partners at lower temperatures," stated Dr. Carlotta Martelli, head of the team at the Institute of Developmental Biology and Neurobiology of JGU. In their study, the scientists focused on the olfactory circuit of Drosophila melanogaster, because the sense of smell determines important behavioral patterns in ...
Are you just tired or are you menopause tired?
2025-03-12
CLEVELAND, Ohio (March 12, 2025)—Multiple menopause symptoms can make women feel fatigued. Hot flashes, sleep problems, pain, and depression are just a few. A new study suggests that heavy or prolonged menstrual bleeding may increase fatigue, which helps to explain why midlife women are two-to-four times more likely to experience debilitating forms of syndromic fatigue. Results of the study are published online today in Menopause, the journal of The Menopause Society.
Most women transitioning through ...
Fluorescent dope
2025-03-12
Kyoto, Japan -- We're all familiar with Pavlovian conditioning, in which a reward-anticipatory behavior follows a reward-predicting stimulus. Perhaps you experience it yourself when passing a café or restaurant and catching a whiff of something delectable.
Behind this mechanism is dopamine released within the striatum, the largest structure of the subcortical basal ganglia, which links motor movements and motivation. Yet it has remained unclear exactly what kind of dopamine signal is transmitted to the striatum to cause this behavior in primates.
In order to understand this dopamine signal, a team of researchers from Kyoto University ...
Meningococcal vaccine found to be safe and effective for infants in sub-Saharan Africa
2025-03-12
University of Maryland School of Medicine (UMSOM) researchers helped conduct an important new global health study that found a vaccine that protects against five strains of meningitis prevalent in sub-Saharan Africa is safe and effective for use in young children beginning at 9 months of age. This study provided evidence that formed the basis for the World Health Organization’s (WHO) decision last year to recommend the pentavalent Men5CV meningitis vaccine for infants ages 9 months and older.
Results of the study were published today in the journal Lancet.
In January 2024, the WHO recommended that all countries in the African meningitis belt introduce Men5CV into their routine immunization ...
Integrating stopping smoking support into talking therapies helps more people quit – new study
2025-03-12
Research from the University of Bath, funded by Cancer Research UK, published on No Smoking Day 2025, shows that integrating smoking cessation support into NHS Talking Therapies for depression and anxiety increases quit rates. This is an important step in addressing the high rates of smoking in this population.
Led by Dr Gemma Taylor at the University of Bath, alongside researchers from several other institutions, the study published in Addiction also found that adding smoking support to mental health treatment didn’t disrupt therapy. Instead, it offered a practical way to tackle mental and physical health together.
About the Study
The trial was conducted across four NHS ...
Breast cancer death rates will rise in elderly EU patients but fall for all other ages
2025-03-12
Death rates from breast cancer will fall in 2025 in every age group in the EU and the UK apart from in EU patients aged 80 years and older. In these older patients, overall mortality rates from the disease are predicted to rise by nearly 10% in 2025.
However, in the UK, breast cancer death rates are expected to decrease by 7% in this age group, compared to rates observed between 2015-2019. In Spain, there is also a 4% decrease in patients aged 80 and over.
These findings are from a new study published in the leading cancer journal Annals of Oncology [1] today (Wednesday), ...
Routine asthma test more reliable in the morning and has seasonal effects, say doctors
2025-03-12
A lung function test used to help diagnose asthma works better in the morning, becoming less reliable throughout the day, Cambridge researchers have found.
Using real world data from 1,600 patients, available through a database created for speeding up research and innovation, the team also found that its reliability differs significantly in winter compared to autumn.
Asthma is a common lung condition that can cause wheezing and shortness of breath, occasionally severe. Around 6.5% of people over six years old in the UK are affected by the condition. Treatments include the use of inhalers or nebulisers to carry ...
Yearly 18% rise in ADHD prescriptions in England since COVID-19 pandemic
2025-03-11
Prescriptions for attention deficit hyperactivity disorder (ADHD) in England have risen 18% year on year since the pandemic. This is higher than previously reported, and masks wide regional variations in prescribing rates, finds research published in the open access journal BMJ Mental Health.
The trends likely reflect growing public and professional awareness of the condition, driven in part by social media, as well as the potential impact of COVID-19, suggest the researchers. But the regional variations point to inequalities in access to care, they add.
ADHD is ...
Public health advice on safety of glycerol-containing slush ice drinks likely needs revising
2025-03-11
Public health advice on the safe consumption of glycerol-containing slush ice drinks, also known as slushees, may need revising, conclude researchers after carrying out a detailed review of the medical notes of 21 children who became acutely unwell shortly after drinking one of these products.
Their findings, published in the journal Archives of Disease in Childhood, show that in each case the child became acutely unwell with a cluster of symptoms soon after drinking a slush ice drink, which the researchers refer to as glycerol intoxication ...
Water aerobics for more than 10 weeks can trim waist size and aid weight loss
2025-03-11
Water/aqua aerobics for 10 or more weeks at a time can trim waist size and aid weight loss, finds a pooled data analysis of the available evidence, published in the open access journal BMJ Open
This type of exercise is particularly effective in overweight/obese women and the over 45s, the analysis indicates.
Global estimates for 2022 indicate that more than 43% of adults worldwide were overweight, and that 504 million women and 374 million men were obese, note the researchers, adding that obesity contributes to an estimated 2.8 million deaths every year.
The buoyancy of water helps reduce joint injuries commonly associated with land based exercise ...